13A 1 and 2 to 3 Gang Switched Converter Socket White

Simple retrofit solution where extra outlets are required

These quality converter sockets easily screw to an existing back box allowing you to convert an existing 1 gang or 2 gang back box into a 3 gang switched socket.

Boasting an slimline design means these sockets sit only 20mm from your wall surface.

Each socket is supplied brand new manufacturer sealed and comes with an unrivaled 25 year guarantee.

Specifications:

• Current Rating: 13 Amp
• Voltage Rating: 250V
• Colour: White
• Height: 84mm
• Length: 200mm
• Depth: 20mm
• IP Rating: IP20
• Full Fitting Instructions Included
  
• Supplied with 2 Fixing Screws and Screw Hole Covers
• CE Approved
• BS1363 Compliant

PLEASE NOTE: When replacing a single socket the coverter is fixed at the right hand side, so extends approximately 85mm to the left of the existing outlet. Due to its dual purpose design a small indentation in the wall 6mm deep is needed to accommodate the earth pin on the left hand side. This only applies if a single outlet is being converted.